CryoParts Power Strip Chassis

CryoParts power strip chassis.

These are made from heavy (.24" or 6mm) aluminum, and have openings milled for two dual receptacles, so you can plug a total of four components into this strip.

This strip measures 8x8x29cm, (3.15"x3.15"x11.42") so there is plenty of room inside to mount a small filter network if one so desires. Both end caps come off for easy access and mounting of the receptacles.

Buy this strip, line it with ERS and stuff it with Oyaide or Furutech receptacles, an IeGO IEC inlet, connect everything with cryo'd wiring, and be confident that power strips do not get any better.

$299.each. Please e-mail us for availability. 10/22/07--1 in stock.

CryoParts power strip chassis.

This power strip is made from 6mm (.24") black anodized aluminum, milled for 3 dual receptacles, so you can plug six components into this guy.

Measuring 6x5.2x35cm (2.36"x2.05"x13.78"), this is a nice slimline power center. The bottom plate comes off, making this chassis very easy to work with and wire.

3 Oyaide or Furutech receptacles, an IeGO IEC inlet, some cryo'd wiring, and this chassis will allow you to make a fantastic power strip.

$199.95/each. E-mail us to order. 10/22.07--1 in stock.

CryoParts power strip chassis.

This power strip is a good, budget power strip enclosure. Lots of room for wiring, or perhaps even installing a small power filter.

Pick out 3 Oyaide or Furutech receptacles, an IeGO or Furutech IEC inlet, some cryo'd wiring, and this chassis will allow you to make a very nice budget power strip.

$99.95/each. E-mail us to order. 10/22/07, 3 on the way.

Oyaide MTUB power strip chassis.

The Oyaide chassis is one of the finest chassis we have found. It is constructed from 2mm thick Brass and has a beautiful, deep, chrome plating. It also employs Brass for two other critical jobs--the receptacles are supported on two Brass rods to damp vibration and there are four milled Brass feet to couple the unit to the floor. For detailed information on the Oyaide power extension chassis, Click Here!

These can be ordered to accept an IEC inlet, or to accept the power cable hard wired. Not cryogenically treated.

Special order. Please allow 3-4 weeks form time of order for delivery. The wait will be well worth it!

MTUB-4, IEC inlet $210 MTUB-4, cable clamp $230 Please contact us to order.